秒速赛车可以玩暗注吗

Current position:

Home > News > Start-up and working steps of the wide belt sanding machine

Start-up and working steps of the wide belt sanding machineNews

Start-up and working steps of the wide belt sanding machine
Release time:2019/9/11 16:19:14 Click times:305

    Wide Belt Sanding Machine is suitable for cleaning, depilation, flattening and polishing of machinery, construction, decoration, furniture primer, etc., painters, furniture factories, handicraft factories, auto repair shops, etc. Sanding before painting, putty polishing, auto atomic grinding, wall renovation, metal descaling, grinding, etc.!

    First, the start and working steps of the wide belt sanding machine:

秒速赛车可以玩暗注吗    1) Adjust the thickness specification of the sanding plate. For the mechanical lifting sander, input the required thickness of the sanding plate on the touch screen, and the motor will automatically run to the set thickness. If the thickness of the sanding plate is different from the thickness of the setting plate, the thickness correction can be performed on the touch screen; Hydraulic lifting sander, the thickness of the plate can be set by changing the specifications of the thickness gauge.

    2) Turn on the air supply, the compressed air pressure reaches 0.6 MPa, and keep the air pressure stable.

秒速赛车可以玩暗注吗    3) Install the abrasive belt of the corresponding size according to the sanding requirements, and adjust the swing frequency and swing if necessary.

    4) Start each main motor separately, pay attention to the sequential start, and start another one after one complete start.

    5) Start the dust removal system and brush roller motor.

秒速赛车可以玩暗注吗    6) Start the feed motor and slowly adjust the speed to 5m/min.

    7) Feed the workpiece and measure its thickness accuracy and surface roughness after the workpiece is sanded. If necessary, re-adjust the coarse sand roller, combined sand frame and fine sanding frame until the sanding of the workpiece meets the requirements.

    8) Feed the workpiece and gradually increase the speed.

    9) Continuously feed the workpiece.

    Second, the wide belt sanding machine operation notes:

    1. Sanding machine is in operation Sand disc, grinding wheel, abrasive belt and polishing wheel have the possibility of cracking and bursting at any time. When the sander brush is operated, it must wear glasses, helmet mask and other protective equipment.

秒速赛车可以玩暗注吗    2. During the operation of the machine, the hands and feet are strictly prohibited from touching the abrasive belt, grinding wheel, grinding head, polishing wheel, etc.

秒速赛车可以玩暗注吗    3. The machine without effective protection measures cannot be used.

    4. A lot of dust will be generated when sanding, and you should wear a mask.

    5. Sanding equipment should be installed in a dry, ventilated place with no direct sunlight.

    6. When using the wide belt sander, it must have matching dust removal equipment, otherwise it will be prone to failure, damage to equipment and affect production.

    7. When belt sanding is found, the belt should be adjusted in time.

秒速赛车可以玩暗注吗    8. Wheel sanding must confirm the exact running direction of the grinding wheel and lock the grinding wheel to prevent the grinding wheel from flying out.