秒速赛车可以玩暗注吗

Current position:

Home > Articles > Characteristics and basic requirements of portable edge banding machine

ArticlesArticle

Characteristics and basic requirements of portable edge banding machine
Release time:2019/7/24 11:51:26 Click times:342

   Characteristics and basic requirements of portable edge banding machine
  Portable edge banding machine adopts automatic control, and the sealing operation range is large, which can ensure that the hot melt adhesive is not smeared, suitable for various plates, small in size, light in weight, higher in function than ordinary portable edge banding machine, suitable for various furniture and cabinets. , teaching equipment factory use, etc.
  Portable edge banding machine comes standard with a small workbench. When sealing small plates, the plates can be placed on the workbench to push the plates for edge sealing. The portable edge banding machine workbench adopts wood quality panel, which is characterized by wear resistance, no deformation and no damage. The portable edge banding machine can reach the use temperature for edge sealing in 5-10 minutes, and at the same time, the heat dissipation hole can be set. When the work is completed, the temperature can be quickly lowered, the hot melt adhesive can be solidified, and the collection can be conveniently carried. The large rubber pot is designed to save work. time.
  Portable edge banding machine heating tube adopts the winding process heating tube, the power is full of heat, the failure rate is low, the service life is long, the cylinder adopts the cylinder with the diameter of 50mm, the machine power is sufficient, the operation is stable, and the edge band and the workpiece are double-sided. Gluing, uniform amount of glue, all the glue supply devices are fixed by multiple points, and the structure is stable. Portable edge banding machine is designed with all-aluminum plastic pot. It is molded by a new type of die casting, and multiple heating rods. The capacity of the plastic pot becomes larger and the preheating time is shortened.
  The engine is the heart of the portable edge banding machine. The track is like a blood vessel. If there is a problem with the engine and the track, then the soul of the processing - the quality of the product must have a fatal impact, the track is unstable. The edge to be sealed fluctuates in the sliding table, which causes the edge to be not straight, which is not conducive to the trimming of the equipment. In addition, the rubber roller and the feeding roller are not well matched, the glue is uneven, and the trimming is performed. The fact that the tool and the chamfering tool are not adjusted are the main factors that cause poor sealing quality.